Altera USB-Blaster Driver

by



You must install the Altera® USB-BlasterTM or Altera USB-Blaster IIdownload cable driver before you can use it to program devices with Quartus® Prime software.

Altera Usb Blaster Driver Windows 7

The first time the USB-Blaster download cable is plugged in, the Windows Found New Hardware dialog box prompts you to install the driver. (Note: Do not use the Add HardwareWizard from the Control Panel.)

The USB-Blaster II device drivers require manual installation so that the cable will be properly recognized. Refer to the instructions below.

The Altera On-Board USB-Blaster II cable appears as Altera USB-Blaster (unconfigured) when first attached to your system. After it has been configured by the Quartus Prime software, it will appear as Altera USB-Blaster II (JTAG interface) and then Altera USB-Blaster II (SystemConsole interface). You might need to install drivers for each of these interfaces; follow the steps below to install the drivers.

Altera Usb-blaster Driver For Windows 10

You must have system administration (Administrator) privileges to install the USB-Blaster and USB-Blaster II download cable driver.

Driver Installation for Altera USB-Blaster

Update the USB Blaster Driver with a Downloaded Driver Right click on Altera USB-Blaster and click Browse my computer for driver software and choose the location, which is likely inside the Quartus installation directory, for example C: intelFPGAlite 18.1 quartus drivers usb-blaster. Driver Installation for Altera USB-Blaster II. Plug the USB-Blaster II cable into your PC. Open the Device Manager, and right-click on the Unknown device under the Other devices branch. Select Update Driver Software. Elect Browse my computer for driver software. ‧ Compatible with Altera USB Blaster ‧ Support JTAG Voltage: 1.2V3.3V (Rev B Only) ‧ Better anti-noise capabilities ‧ The same circuit is used in Altera DE2 Board designed/manufactured by Terasic.

  • USB Blaster ByteBlaster II ALTERA. Altera usb blaster - byteblaster ii cpld fpga download cable jtag chain debugger. Installing the altera usb byteblaster in windows vista 32bit or 64bit 2/7 step 3, click browse my computer for driver software advanced.
  • Plug the USB-Blaster download cable into the PC. The Found New Hardware dialog box appears. Select Locate and install driver software (recommended). Select Don't search online. When you are prompted to Insert the disc that came with your USB-Blaster, select I don’t have the disc. Show me other options.
  1. Plug the USB-Blaster download cable into your PC. The Found New Hardware dialog box appears.
  2. Select Locate and install driver software (recommended).
  3. Select Don't search online.
  4. When you are prompted to Insert the disc that came with your USB-Blaster, select I don’t have the disc. Show me other options.
  5. Select Browse my computer for driver software (advanced) when you see the Windows couldn’t find driver software for your device dialog box.
  6. Click Browse, and browse to the<Path to Quartus Prime installation>driversusb-blaster directory.
    • Note: Do not select the x32 or x64 directories.
  7. Click OK.
  8. Select the Include subfolders option, and click Next.
  9. If you are prompted Windows can’t verify the publisher of this driver software, select Install this driver software anyway in the Window Security dialog box. The installation wizard guides you through the installation process.
  10. When The software for this device has been successfully installed dialog box appears, click Close.
  11. To complete your installation, set up programming hardware in the Quartus Prime software.

Altera Usb Blaster Driver Windows 7

Altera USB-Blaster Driver

Altera Usb Blaster Driver

Driver Installation for Altera USB-Blaster II

  1. Plug the USB-Blaster II cable into your PC.
  2. Open the Device Manager, and right-click on the Unknown device under the Other devices branch.
  3. Select Update Driver Software.
  4. Select Browse my computer for driver software.
  5. Enter the location of the Quartus Prime software USB-Blaster II driver files directory (<Path to Quartus Prime installation>driversusb-blaster-ii) in the Search for driver software in this location field.
  6. Click Next.
  7. Click Install in the Would you like to install this device software? Windows security dialog box.
  8. Close the Update Driver Software - Altera USB-Blaster II (Unconfigured) successful installation notification. The Device Manager now shows a new branch called JTAG cables with an Altera USB-Blaster II (Unconfigured) node.
  9. Open the Quartus Prime Programmer. Within a few seconds, the JTAG cables branch displays two nodes: Altera USB-Blaster II (JTAG interface) and Altera-USB Blaster II (System Console interface).